Directiva 2006/42/CE
Machinery
Without the EC Declaration of Conformity and the affixation of the EC marking, no machinery can be legally placed on the market and put into service.
Advantages of Certification
- ensure that it satisfies the relevant essential health and safety requirements set out in Annex I of the directive;
- ensure that the technical file referred to in Annex VII, part A is available;
- provide, in particular, the necessary information, such as instructions;
- carry out the appropriate procedures for assessing conformity in accordance with Article 12;
- draw up the EC declaration of conformity in accordance with Annex II, part 1, Section A and ensure that it accompanies the machinery;
- affix the CE marking in accordance with Article 16.
Government Decision 1029/03.09.2008 establishing the requirements for placing on the market of the machinery that adopted Directive 2006/42/EC Machinery safety specifies at Art. 6 line 1: Before placing machinery on the market and/or putting it into service, the manufacturer or his authorized representative shall:
In order to issue the EC Declaration of Conformity the producer or the authorized representative shall apply one of the conformity evaluation procedures specified at line (2), (3) and (4), in compliance with provisions of art. 13 of the GD 1029/2008.
For the machinery mentioned below, the easiest manner of compliance with the requirements of the Directive is the EC certification by applying the procedure „Full quality assurance”, in compliance with Art. 12 alin.3/c and alin.4/b / Annex X of the GD 1029/2008.
Categories of machinery: devices for the lifting of persons and goods involving a hazard of falling from a vertical height of more than 3 meters.
Why SRAC?
SRAC CERT carries out the conformity assessment according to Government Decision no. 1029/2008 based on Directive 2006/42/EC – Machinery.
For these products within the mandatory area, SRAC CERT is:
- accredited by RENAR (certificate no. ON 108);
- notified by the European Commission (the identification number NB 2003).
SRAC performs certification for the application of CE marking for industrial machinery in compliance with the provisions of Directive Machinery 2006/42/EC (adopted through GD 1029/2008), Module “Full Quality Assurance”. The certification process verifies the compliance with the provisions of the harmonized standards related to machinery directive and applicable to the product that is subject of certification.
Do you want to know costs or other details?
Request an offer and you will receive a response as soon as possible.
Courses
Are you interested in courses in the upcoming period?
Check the current month's calendar
or go to the training page.
Do you need guidance?
Are you interested in courses in the upcoming period?